1202 COHERE – 1.7mil Easy-Tear General Purpose & Stationary Tape

Typical Applications:
For a variety of mending, sealing, attaching, and protecting applications in an industrial, commercial, household, and/or office applications where long aging and non-yellowing adhesive is required.

Description

Film:

Biaxially Oriented Polypropylene

Total Thickness:

1.7Mils

Adhesive:

Emulsion Acrylic

Color(s):

Clear

Physical Properties

Tensile Strength (lbs/in):

10

PSTC-31*

(ASTM D3759**)

Elongation (% at break):

140 Maximum

PSTC-31

(ASTM D3759)

180° Peel Adhesion (oz/in):

17

PSTC-1

(ASTM D3330***)

Resistance to UV Light:

Excellent

Application Temperature

32° to 140° F

Operation Temperature

-10° to 200° F – normal range.  Contact your STA representative to determine the actual temperature range specific to any particular applications.

Typical Appliciations

For a variety of mending, sealing, attaching, holding and protecting applications in an industrial, commercial, household and/or office applications where long aging and non-yellowing adhesive is required.

Other Standards & Specifications

Conforms to FDA SPECS: 21 CFR 175.105 and CFR 177.1520 for Indirect Food Contact (Clear tape only)

Complies with Environmental Consideration of ASTM D 1974-10′

Application & Operating Conditions:

The conditions at which the tape is unwound and applied to the substrate.  Under normal conditions, the tape should unwind and adhere to the substrate properly and perform as normally expected.  The tape should be used within 1 year of the date of shipment.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of STA products are beyond STA’s control. It is recommended that the prospective user determine their suitability before adapting them on a commercial scale.

*Pressure Tape Council

**ASTM Standard D3759, “Standard Test Method for Tensile Strength and Elongation of Pressure Sensitive Tapes”

***ASTM Standard D3330, “Standard Test Method for Peel Adhesion of Pressure Sensitive Tapes”

ASTM International, West Conshohocken, PA.  www.astm.org.