Typical Applications:
For sealing moderate weight cartons subjected to normal shipping conditions in a wide range of temperatures where quick tack, fast production hot melt adhesive is desired.
| Product Description | |||
|---|---|---|---|
|
Total Thickness: |
1.9 mils (nominal) |
||
|
Adhesive: |
Synthetic Rubber Hot Melt |
||
|
Color(s): |
Clear |
||
| Physical Properties | |||
|---|---|---|---|
|
Tensile Strength (lbs/in): |
24 |
PSTC-131* |
(ASTM D3759**) |
|
Elongation (% at break): |
140 |
PSTC-131 |
(ASTM D3759) |
|
180° Peel Adhesion (oz/in): |
36 |
PSTC-101 |
(ASTM D3330***) |
|
Resistance to UV Lighting: |
Fair |
||
| Application Temperature | |||
|---|---|---|---|
|
32° to 120° F |
| Operation Temperature | |||
|---|---|---|---|
|
-10° to 120° F |
| Typical Applications | |||
|---|---|---|---|
|
For sealing moderate weight cartons subjected to normal shipping conditions in a wide range of temperatures where quick tack, fast production hot melt adhesive is desired. |
| Other Standards and Specifications | |||
|---|---|---|---|
|
Complies with environmental considerations of ASTM D 1974-14 |
| Application and Operating Conditions: | |||
|---|---|---|---|
|
The conditions at which the tape is unwound and applied to the substrate. Under normal conditions, the tape should unwind and adhere to the substrate properly, and perform as normally as expected. The tape should be used within 1 year of the date of shipment. Notes: *Shear is the tape’s ability to resist the sliding of two substrates relative to each other’s planes of contact (to hold flaps down). The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of STA products are beyond STA’s control. It is recommended that the prospective user determine their suitability before adapting them on a commercial scale. *Pressure Sensitive Tape Council |